Guest Blog: John Zaya
Clamp confirmation for any system, UNILOCK or otherwise, is a sound design criterion when building any workholding system.
It is very common to see clamp/un-clamp confirmation in many automated loading systems as safety interlocking of the CNC machine, robot, robot EOA (end-of-arm) tooling, and workholding can all be integrated to a single master control.
Un-clamp confirmation does have a place in manual situations as well, mostly in large part processing, where cranes are used to lift parts off.
When a clamping system is not directly visible underneath a large part, then this requires an external indicator confirming that the system has successfully un-clamped and that it is safe to lift.
The indicators and sensors can be pneumatic switches which are offered by BIG KAISER or electrical proximity switches as offered by many other companies.
Leave a Reply.
Technical Support Blog
At Next Generation Tool we often run into many of the same technical questions from different customers. This section should answer many of your most common questions.
We set up this special blog for the most commonly asked questions and machinist data tables for your easy reference.
If you've got a question that's not answered here, then just send us a quick note via email or reach one of us on our CONTACTS page here on the website
Our technical section is written by several different people. Sometimes, it's from our team here at Next Generation Tooling & at other times it's by one of the innovative manufacturer's we represent in California and Nevada.
Next Generation Tooling
10240 Cavalletti Drive
Sacramento CA 95829
© 2023 Next Generation Tooling, LLC.
All Rights Reserved
Created by Rapid Production Marketing