 Guest Blog: Alan Miller Engineering Manager & Product Manager BIG alan.miller@us.bigkaiser.com Tel: 224.770.2903 Proper clamping techniques will ensure the proper operation of all mechanical milling chucks.  After the tool is released it is also very important to rotate the nut two additional rotations after the tool can be removed. With MEGA Double Power and Hi-Power Slim type chucks it is very important to stop when the nut contacts the main body.
If the operator over tightens or “jerks” the wrench after contact is made, the two faces will wring together making it much more difficult to loosen the tool. After the tool is released it is also very important to rotate the nut two additional rotations after the tool can be removed. This makes sure the chuck is fully released and is ready to be clamped again. If the chuck is retightened without fully releasing the nut the gripping strength will be reduced.
0 Comments
|
Technical Support BlogAt Next Generation Tool we often run into many of the same technical questions from different customers. This section should answer many of your most common questions.
We set up this special blog for the most commonly asked questions and machinist data tables for your easy reference. If you've got a question that's not answered here, then just send us a quick note via email or reach one of us on our CONTACTS page here on the website AuthorshipOur technical section is written by several different people. Sometimes, it's from our team here at Next Generation Tooling & at other times it's by one of the innovative manufacturer's we represent in California and Nevada. Archives
September 2018
Categories
All
|
RSS Feed
