In this particular application, the customer needs to reduce cycle time. Allied Engineers accessed the problem and provided a solution to reduce cycle time by 67%.
A hole was drilled and a boring system roughed and then finished the whole. This process took 42 minutes to complete.
Our 150˚ T-A insert drilled the hole and we finished the hole with a replaceable head reamer system. This process took 14 minutes to complete saving 28 minutes per part.
Technical Support Blog
At Next Generation Tool we often run into many of the same technical questions from different customers. This section should answer many of your most common questions.
We set up this special blog for the most commonly asked questions and machinist data tables for your easy reference.
If you've got a question that's not answered here, then just send us a quick note via email or reach one of us on our CONTACTS page here on the website
Our technical section is written by several different people. Sometimes, it's from our team here at Next Generation Tooling & at other times it's by one of the innovative manufacturer's we represent in California and Nevada.
Next Generation Tooling
10240 Cavalletti Drive
Sacramento CA 95829
© 2022 Next Generation Tooling, LLC.
All Rights Reserved
Created by Rapid Production Marketing