A human hair is about .0040” thick. Martindale Gaylee solid carbide saws can be manufactured as thin as .0020” which is half the thickness of a human hair. This extreme miniaturization is made possible through their numerous years of experience.
At the other end of the spectrum, solid carbide saws can also be made as thick as 1.000” with O.D.’s typically ranging from .250” to 7.500” (6.35mm to 190mm) and tighter than standard tolerances are also available.
Keep in mind that all solid carbide saws 2” diameter and larger are manufactured with a standard hub and round key.
Martindale Gaylee has a dedicated team of saw-makers unparalleled the world over. From saws to cutting knives to slitters, slotters and cutters...we’re prepared to work with you on your specific application.
The miniature saw shown on the left above has an O.D. of 3⁄4” with 18 precision teeth. The saw shown on the right has an O.D. of 1⁄2” with 14 precision teeth. Gaylee takes pride in producing precision saws unsurpassed by any other manufacturer for your application.
Get in touch with us with any questions about solid carbide saws!
Technical Support Blog
At Next Generation Tool we often run into many of the same technical questions from different customers. This section should answer many of your most common questions.
We set up this special blog for the most commonly asked questions and machinist data tables for your easy reference.
If you've got a question that's not answered here, then just send us a quick note via email or reach one of us on our CONTACTS page here on the website.
Our technical section is written by several different people. Sometimes, it's from our team here at Next Generation Tooling & at other times it's by one of the innovative manufacturer's we represent in California and Nevada.