NTK offers an extensive line of high precision boring tooling designed for Swiss machines. One of these produce lines is called “Mogul Bar”. The Mogul Bar system provides the user outstanding chip control and higher rigidity than most conventional tooling on the market.
Outstanding chip evacuationThe most notable characteristics of the Mogul Bar is excellent chip evacuation and chip control. Mogul Bars outfitted with NTK’s “F” or “FG” chipbreaker inserts will evacuate chips backwards.
This means that when a Mogul Bar machines an I.D. bore, chips comes out towards the bore entrance. The major-ity of boring processes on Swiss machines are done on the main spindle side and thus the bore itself is a blind hole. This machining process creates many issues if you use conventional boring bars designed for CnC lathes.
Typical difficulties incurred during a boring process on Swiss machines are either chips remaining in the bore and rough surfaces caused by inconsistent chip control. However, Mogul Bars equipped with nTK uniquely designed chipbreakers, evacuate chips straight backwards and solves both of these problems at once.
Another important feature of the Mogul Bar series is high rigidity. Mogul Bars increased rigidity is a result of a newly designed bar head configuration and a minimal flat width on the bar.
Steel shank Mogul Bars can machine as deep as L/D=5, a depth which nor-mally requires expensive carbide shank boring bars.
NTK carbide shank Mogul Bars can machine up to L/D=7 depth and this gives users flexibility of machin-ing deeper bores in a single process. rigidly and mini-mal flat widths reduce vibration.
Variety of Insert Grades
NTK offers both coated carbide grades and cermet insert grades for Mogul Bars. As most tooling engineers know, cermet grades can machine at faster speeds with higher productivity, provide better sur-face finishes and can achieve more accurate dimen-sion control, than carbide grades. These benefits come from the fact that the primary substrate of cermet grades, Tin /TiC, are chemically stable compared with WC of carbide grades and have better adhesion resistance.
Mogul Bars are available from a minimum machining diameter of 5mm. With the combination of NTK unique chipbreakers, you can enjoy better chip control and highly rigid boring bars. In comparison with solid carbide boring tools, Mogul Bars has cost advantage as well.
If you are facing chip control or chattering issues, NTK believes that Mogul Bars can be the answer to your problems.
Technical Support Blog
At Next Generation Tool we often run into many of the same technical questions from different customers. This section should answer many of your most common questions.
We set up this special blog for the most commonly asked questions and machinist data tables for your easy reference.
If you've got a question that's not answered here, then just send us a quick note via email or reach one of us on our CONTACTS page here on the website
Our technical section is written by several different people. Sometimes, it's from our team here at Next Generation Tooling & at other times it's by one of the innovative manufacturer's we represent in California and Nevada.