Complex part shapes have time consuming part loads to assure the part is properly nested before machining. Blue Photon makes a hard to load part easy and reduces the number of loads.
Traditional workholding does not usually utilize a machine’s full capabilities because of limited machining access therefore multiple workholding fixtures and process steps are required.
*Labor cost per part was calculated @ $50.00 per hour, based on 21 hours run time per (3) 8 hour shifts/5 day work weeks. 6,240 total hrs. per year
How the blue photon system realized reduce labor cost
With Blue Photon workholding technology, once the part is bonded to the transfer tool it can be loaded into all machines using the same machine mounted workholding fixture system such as Erowa, System 3R etc. The workpiece loads in seconds.
The ability of Blue Photon workholding technology to hold the workpiece on one side providing 5 and in some cases 6 side machining access is unheard of when machining castings and other near-net shape parts.
There is also reduced foot print for this cell and reduced capital investment to create the cell because multiple operations can be done in one workholding.
Technical Support Blog
At Next Generation Tool we often run into many of the same technical questions from different customers. This section should answer many of your most common questions.
We set up this special blog for the most commonly asked questions and machinist data tables for your easy reference.
If you've got a question that's not answered here, then just send us a quick note via email or reach one of us on our CONTACTS page here on the website
Our technical section is written by several different people. Sometimes, it's from our team here at Next Generation Tooling & at other times it's by one of the innovative manufacturer's we represent in California and Nevada.