NEXT GENERATION TOOLING
  • Home
    • Schedule
    • Training
  • About
    • History
    • Contact
  • Territories
    • NorCal & N-NV
    • SoCal & S-NV
    • Mountains
  • Principals
    • Tooling >
      • 2V Industries
      • BIG Daishowa
      • Champion Storage
      • Drill America
      • Jewell Group
      • Mapal
      • Martindale Gaylee
      • OSG Tool
      • Performance Micro Tool
      • Platinum Tooling
      • TechniksUSA
    • Workholding >
      • BIG Daishowa
      • Earth Chain
      • Jergens
      • mPower Workholding
  • Promotions
  • Events
  • News
  • Technical

Next Generation Tooling Opens Two Offices in California to Provide Technical Support During the Pandemic.

8/3/2020

2 Comments

 
by Bernard Martin
Next Gen Tooling SoCal 22343 La Palma Ave, Yorba Linda, CA
Next Generation Tooling's new SoCal Office, Showroom, Warehouse & Training facility is located at 22343 La Palma Avenue, Suite 126, Yorba Linda, CA 92887
Sacramento, CA. -  Next Generation Tooling, LLC, a manufacturer's representative agency, founded in 1995 and servicing the California Nevada Arizona, Utah, Colorado and New Mexico CNC manufacturing markets has just opened TWO offices in California.
Most of Next Generation Tooling's customers know them as "the Next Gen guys" according to Chris Savolainen, the Founder and President of 'Next Gen Tooling'.

What was the rationale of opening not one, but two offices when the entire team has worked out of their own home offices for years?
next-generation-tooling-manufacturer-agent-representive-metalcutting-machining-map
"We've grown our market service area quite a bit since we started out servicing just Northern California.  We now include most of the Western States of the US.  We've s been adding some of the best technical CNC application people we can find to support the unique mix of principles we represent. The products that we represent are what are considered very high performance tooling and workholding.  It's some of the premiere products in our entire industry! We determined that we really needed a place to provide on-site technical training.  We also needed to carry some inventory to support the unique needs of the aerospace, medical, electronics and defense industries that we support." Said Savolainen.

Rob Aldama, Vice-President of Next Gen Tool picks up the story,  "At first we thought that one training and showroom might be good enough, but as we started talk to our distributor, machine dealer and end-user manufacturing customers, we discovered that there was a real need for facilities in both Northern and Southern California. None of our competitors are providing the deep technical service that has helped us gain market share, so we really felt we should just take it to the next level and open two facilities."
Next Generation Tooling NorCal Office Showroom
Next Generation Tooling's new NorCal Office, Showroom, Warehouse & training facility is located at 8171 Alpine Ave, Suite A, Sacramento, CA 95829

But what about the Pandemic?

With the Covid-19 pandemic raging there are not a lot of companies expanding. Most are cutting costs and employees. When asked about this both Chris and Rob stated that their team of people have remained pretty busy throughout this entire period. 

Chris said "We get asked in to shops to provide technical support pretty often. Putting on the full body PPE suits has been kind of common for us during the past few months." 

Rob picked it up from there, "I think we may be some of the really select few that have been asked to come into shops because we're not just taking orders, we're reducing cycle time and we're improving efficiency"

Chris jumped back in, "And maybe its a little bit self serving,  We can have the equipment set-up at both locations instead of trying to bring it into a facility.  It's actually a lot easier, faster and safer to bring people to one of our locations rather than try to move things with lots  of sweat and heavy breathing in PPE." 

"Yea, We can bring people to either location and do the training.  There are far less interruptions and the I think people learn a lot more, and learn it faster" stated Rob.

NGT Warehouse and Training

What types of training do they provide at Next Gen's new buildings?  They start off with a lot of fundamentals that people running CNC machines may never had any formal training about. That's where their basic Training Classes fit in.
Next Generation Tooling 25th Anniversary
  • Machining 101
  • Basic Boring
  • Basic Chamfering
  • Basic Drill Training
  • Basic End Mill
  • Basic Indexable
  • Basic Tap Training
  • Basic Tool Holders
  • Basic Work Holding / Fixturing​

But they also can go much deeper with their Advanced Part Manufacturing training series
  • Programming Tool Path – Climb versus Conventional
  • Material Machinability – Cubic Inches of Stock Removal
  • Part Set Up / Workholding  & Fixturing
  • Tool Holder Selection, Collet, Solid, Hydraulic, Shrink Fit
  • Cutting Tool Selection – Substrate, Geometry, Coating, Speed and Feeds 
  • Estimating Part Cycle Time
Learn More About Training
2 Comments

MUST SEE: IMTS 2018 Show Planner

8/22/2018

0 Comments

 
Join us at #IMTS2018!
We'll be learning about new products at our principals booth. 
Check out our schedule, come join us and we'll learn some new things together!

Next Generation Tooling IMTS 2018 Booth Tooling Workholding
Wednesday September 12th
10:30 - 11:30 AM - NTK Cutting Tools Booth W-431664
1:00 to 3:00 PM - Big Kaiser Booth W-431610

Thursday September 13th
10:00 to 11:00 AM - Heimatec Booth W-433427
11:00 to 12:00 PM - 5th Axis Booth W-431158
1:00 to 2:00 PM - Precision Cutting Tools  W-432164

Friday September 14th
10:00 to 11:00 AM - Carmex Booth W-431480
11:00 to 12:00 PM - OSG Booth W-432080
1:00 to 2:00 PM - Techniks Booth W-431075

0 Comments

The EXOTAP® A-Tap® is an all-purpose tap series designed to simplify tool management

1/17/2018

0 Comments

 
OSG EXOTAP A-Tap
The EXOTAP® A-Tap® is an all-purpose tap series designed to simplify tool management and to excel in a wide variety of materials and applications. ​

The EXOTAP® A-Tap® is made from powdered metal HSS and has OSG's patented V coating to achieve excellent wear resistance.
The spiral flute series has adopted a variable helix flute design, which encourages stable chip evacuation and reduces cutting forces. The spiral point series has unique geometry that enables greater chip control that can help produce tightly compacted chips for easy ejection from the hole.

Ideally suited for:
  • 300 Series Stainless Steel
  • 400 Series Stainless Steel
  • 17-4 PH Stainless Steel
  • Hardened Steels ~ 35R/c
EXOTAP® A-Ta
Features
  • Sharp Cutting Edge
  • Variable Helix Flute
  • OSG's Proprietary V Coating
  • Powder Metallurgy HSS
Learn More
0 Comments

Premium Tap Series for Machining Titanium Alloys

4/9/2014

0 Comments

 
A new series of taps is designed for machining titanium alloys. They are well suited for difficult threading applications.

OSG Tap & Die (OSG) has introduced a premium tap series, the EXOPRO-Ti, for putting threads in materials like titanium alloys; Commercially Pure 6Al4V & 4Al4V

The EXOPRO-Ti is designed for improved performance in difficult threading applications. The EXOPRO-Ti's cutting edge has been optimized for maximum sharpness and strength, while its reverse-helix flutes push chips ahead of the tap, helping eliminate chip evacuation problems. With the addition of OSG's proprietary V coating, tool life can be further prolonged, providing users with maximum cost-efficiency, said the company.
Picture
Picture
0 Comments

Variable Helix Tap Series Designed for Stainless Steel

3/12/2014

0 Comments

 
Picture
The Exopro-CC-SUS spiral tap series from OSG Tap & Die is designed for tapping stainless steel, as well as carbon and alloy steels.

Constructed of vanadium high speed steel, the tap features a variable lead-flute design with chip control for stable chip evacuation. This new series provide increased consistency, improved reliability and extended tool life with water-soluble coolants. The taps are available in sizes ranging from No. 2 to 1" and M2 to M4.

  • Variable Lead Flute - The Helix angle from the chamfer where the chips are formed to the flutes with the chips are evacuated.
  • Advanced Chip Control (CC) enables trouble-free chip evacuation.
  • Vanadium HSS with TiN coating.
  • Great for high speed tapping with synchronized spindles.
Picture
0 Comments

Thinking about synchronous tapping to reduce CNC cycle time?

5/15/2013

3 Comments

 
One of the most common methods of tapping in use today on CNC machines is “rigid tapping” or “synchronous feed tapping.” A rigid tapping cycle synchronizes the machine spindle rotation and feed to match a specific thread pitch. Since the feed into the hole is synchronized, in theory, a solid holder without any tension-compression can be used.
However the problem with this is that in actual practice it is impossible for the machine to exactly match the pitch of the specific tap being used. There is always a slight discrepancy between what the machine is doing and the actual pitch of the tap. If a solid holder is used, this discrepancy is detrimental to tap life and thread quality because extra axial forces are exacted on the tap.

The Mega Synchro Tapping Holders from Big Kaiser feature a unique mechanism to compensate for synchronization errors during rigid tapping. 
Picture
The special feature absorbs the pitch difference between the tap and spindle, which exorbitantly reduces the thrust loads on the tap and workpiece. This stretches tool life, and improves overall thread quality...up to 90%. Mega Synchro comes in a wide variation of 47 bodies and 258 tap holders. The various combinations of body and tap holder offers ideal projection lengths for any machine

The Mega Synchro Tapping Holders will provide you with the variety necessary to create ideal projection lengths from job-to-job and reduce those problematic bottlenecks in your CNC cycle time.
  • Improves thread quality and tool life
  • Absorbs the pitch difference between the tap and spindle when using rigid tapping
  • Coolant through center capability for all models except MGT3
  • 47 Bodies and 258 Tap Holders
  • Body and Tap Holder are fixed with a drive key
  • Short, middle, long & extra long tap holders are standardized
  • Super slim tap holder - Dia. .630 with MGT6 model
  • Dual contact interfaces are standard
  • ANSI: No.0-AP1
  • JIS/DIN/ISO: M1-M36
3 Comments

    Author

    Our NEWS  blog section is written by several different people. Sometimes, it from our team here at Next Generation Tooling & at other times it's by one of the manufacturer's we represent.

    View my profile on LinkedIn

    Archives

    March 2023
    February 2023
    January 2023
    December 2022
    November 2022
    October 2022
    September 2022
    August 2022
    July 2022
    June 2022
    May 2022
    April 2022
    March 2022
    February 2022
    January 2022
    December 2021
    November 2021
    September 2021
    August 2021
    July 2021
    June 2021
    May 2021
    April 2021
    February 2021
    January 2021
    December 2020
    November 2020
    October 2020
    September 2020
    August 2020
    July 2020
    June 2020
    May 2020
    April 2020
    March 2020
    February 2020
    January 2020
    December 2019
    November 2019
    October 2019
    September 2019
    July 2019
    May 2019
    April 2019
    March 2019
    February 2019
    December 2018
    November 2018
    October 2018
    September 2018
    August 2018
    July 2018
    May 2018
    March 2018
    January 2018
    December 2017
    November 2017
    October 2017
    September 2017
    August 2017
    July 2017
    June 2017
    May 2017
    April 2017
    March 2017
    February 2017
    January 2017
    December 2016
    November 2016
    September 2016
    July 2016
    June 2016
    May 2016
    April 2016
    March 2016
    February 2016
    October 2015
    September 2015
    June 2015
    May 2015
    April 2015
    March 2015
    February 2015
    January 2015
    December 2014
    October 2014
    September 2014
    August 2014
    June 2014
    May 2014
    April 2014
    March 2014
    February 2014
    January 2014
    December 2013
    October 2013
    August 2013
    June 2013
    May 2013
    April 2013
    February 2013
    January 2013
    November 2012
    October 2012
    September 2012
    August 2012
    June 2012
    April 2012
    January 2012
    October 2011
    September 2011
    August 2011
    July 2011
    June 2011
    April 2011
    February 2011
    April 2009

    Categories

    All
    2V Industries
    5 Axis
    Aerospace Composites
    Agile Manufacturing
    Allied AccuPort 432
    Allied APX
    Allied EcoCut
    Allied GEN2 T A
    Allied GEN3SYS
    Allied Machine
    Allied Opening Drill
    Allied Original T A
    AMF
    AMT Association For Manufacturing Technology
    BIG Base Master
    BIG Daishowa
    Big Kaiser
    Big Kaiser 318
    Big Kaiser C Cutter Mini
    Big Kaiser C-Cutter Mini
    Big Kaiser EWD EVO
    Big Kaiser Mega Synchro
    Big Kaiser Smart Damper
    Big Kaiser Sporen
    Big Kaiser Unilock
    BIG PLUS
    Blue Photon
    BMT
    Bone Plates
    Boring
    Boring Bars
    Boring Heads
    Boring Large Diameter
    Carmex
    Cbn
    CERAedge Coating
    Chamfering
    Champion Tool Storage
    CNC Milling
    CNC Swiss
    CNC Turning
    Coating AlCrN
    Coating AlTiN
    Coating CERAedge
    Coating PVD
    Coating TiAlN
    Coating TiN
    Coating WXL
    Collets
    Collets DNA
    Collets ER
    Coolant
    Coronovirus
    Countersinks
    Covid 19
    Covid-19
    Deburring
    Digital
    DMG Mori
    Drilling
    Drills Minature
    Drills Spade Type
    Earth Chain
    Efficiency
    End Mills
    End Mills Ceramic
    End Mills Minature
    Engraving Tools
    F20M10
    Fiber Reinforced
    Fifth Axis
    Fixturing
    Gibson Guitar
    Guide Bushings
    Haas Automation
    Hard Milling
    Heimatec
    Heimatec BMT
    Heimatec VDI
    Henninger
    Herringbone Cutter
    Hobbing
    Hommel + Keller
    Hydraulic Chuck
    Hypermill
    IMTS
    IPad
    ITunes
    Jergens
    Kennametal
    Knurling Tools
    Lean Manufacturing
    Machining App
    MA Ford
    MA Ford 178
    MA Ford 278
    MA Ford Diacon
    MA Ford Tuffcut 138
    MA Ford Tuffcut XR7
    Magnetic Deburring
    Marking Tools
    MASA Tool
    Material 13-8
    Material 17 4
    Material 304
    Material Aerospace
    Material Aluminum
    Material Carbon Fiber
    Material CFRP
    Material Cobalt Chrome
    Material Exotic Alloy
    Material Honeycomb
    Material HRSA
    Material Inconel
    Material Laminate
    Material Nomex
    Material Peek
    Material Stainless Steel
    Material Steel
    Material Titanium
    Mega Micro Chuck
    Metalworking Fluid
    Mfg Day
    Microconic
    Microconic 5C
    Microconic F20M10
    Micromachining
    Modern Machine Shop
    Mold
    MPower
    MPower ModLoc
    MPower SpeedLoc
    MPower SpinSelect
    Next Gen Tooling
    NRL National Robotics League
    NTK
    NTK Cut-Off
    NTK SX7
    NTK SX9 SiALON
    NTK TFX
    OK-Vise
    OSG A Brand
    OSG ADF Drill
    OSG Exocarb
    OSG Exopro
    OSG Exotap
    OSG HY Pro Carb
    OSG HY-Pro Carb
    OSG Phoenix
    OSG Tap & Die
    OSG VA-3
    OSG VC-10
    Parlec
    PCD
    PCT
    Platinum Tooling
    PMT
    Presetter
    Promotions
    Quick
    Reamers
    Right Angle Head
    Rineck
    RockLock
    Rotary Toolholders
    Router Downshear
    Router Tooling
    Router Upshear
    Set Up Reduction
    Shrink Fit
    Somta Tools
    Specials
    Speroni
    SPINner
    STEM
    Step Drill
    Suzuki
    Tapping
    Technical Support
    Technicrafts
    Techniks
    Techniks Collets
    Tecnicrafts
    Thread Mill
    Tooling Package
    Tool Presetting
    Unilock
    USMTO
    Vanadium HSS
    Variable Flute
    Workholding
    Workholding Dovetail
    Workholding Milling
    Workholding Turning
    Xebec

    RSS Feed

Picture

About
Contact
TOOLING
WORKHOLDING
EVENTS
NEWS
TECHNICAL


Established 1995
​

Next Generation Tooling
10240 Cavalletti Drive
Sacramento CA 95829
916.765.4227
Northern California
23 Maxwell Street
Suite B
Lodi, CA 95240
Southern California
22343 La Palma Avenue
​Suite 126
Yorba Linda, CA 92887
© 2023 Next Generation Tooling, LLC. 
All Rights Reserved
Created by Rapid Production Marketing

Find us on Instagram @nextgentool

  • Home
    • Schedule
    • Training
  • About
    • History
    • Contact
  • Territories
    • NorCal & N-NV
    • SoCal & S-NV
    • Mountains
  • Principals
    • Tooling >
      • 2V Industries
      • BIG Daishowa
      • Champion Storage
      • Drill America
      • Jewell Group
      • Mapal
      • Martindale Gaylee
      • OSG Tool
      • Performance Micro Tool
      • Platinum Tooling
      • TechniksUSA
    • Workholding >
      • BIG Daishowa
      • Earth Chain
      • Jergens
      • mPower Workholding
  • Promotions
  • Events
  • News
  • Technical