NEXT GENERATION TOOLING
  • Home
    • Schedule
    • Training
  • About
    • History
    • Contact
  • Territories
    • NorCal & N-NV
    • SoCal & S-NV
    • Mountains
  • Principals
    • Tooling >
      • 2V Industries
      • BIG Daishowa
      • Champion Storage
      • Drill America
      • Jewell Group
      • Mapal
      • Martindale Gaylee
      • OSG Tool
      • Performance Micro Tool
      • Platinum Tooling
      • TechniksUSA
    • Workholding >
      • BIG Daishowa
      • Earth Chain
      • Jergens
      • mPower Workholding
  • Promotions
  • Events
  • News
  • Technical

When Boring gets painful is it time to go digital? 

8/14/2013

0 Comments

 
Picture
This article originally appeared in the May 2013 / Volume 65 / Issue 5 of Cutting Tool Engineering titled "Evolving toward digital"  By Matt Tegelman, BIG Kaiser Precision Tooling Inc.

Boring tools with a digital readout aren’t the standard in U.S. shops, but their use is growing.Think about the number of digital equipment interfaces and interactions an operator has when machining.

Machine operators use keypads and computers to run tooling programs and measure parts with digital gages and coordinate measuring machines. By definition, CAD/CAM work is accomplished digitally. Machine tool controls have digital displays. On most tool presetters—even simple ones without a vision system—the readout is digital. Bore gages are digital, whether it’s an air gage or a three-point-contact gage. There are still a few old-timers who trot out ID micrometers once in awhile, but most measurement devices are digital for speed and accuracy.
Digital has become the common language in metalworking and machining. The primary advantage of digital is its precision. There’s nothing subjective about a numerical reading. And this advantage has made its way to the boring head, where it is has been established technology for 10 years but is still far from being universally used.

As such, digital boring heads bridge the technology gap between digital measuring technology and existing tooling systems by adding a digital readout (DRO) to clearly show incremental diameter changes. So when an operator measures a bore and finds it undersized by 0.0004 " on the DRO of his measurement device, he simply has to zero the boring headreadout and adjust the diameter until the digital display reads “+0.0004 ".”

For the tightest-tolerance operations, one comparative drawback with analog systems is the frequency of human error—especially when the dial divisions are 0.0005 " on diameter. In addition, vernier markings complicate the adjustment procedure when it is necessary to split the divisions even finer. At that point, operators aren’t just moving from one division to another; they are forced to keep track of two different sets of markings to make fine adjustments, which can be confusing.

Of course, an operator could misread the number of zeros on a digital boring head, turning 0.0005 " into 0.005 ". But that error happens less frequently than an error caused when adjusting to a dial marking on a head that doesn’t have a DRO.
Picture
Kaiser’s new Series 112 EWD 2-54 precision-finish boring head has a built-in digital display that allows operators to make adjustments on the fly. The digital unit uses accessories from the Kaiser EWN 2-50XL Series, accommodates through-coolant and can be operated at a maximum spindle speed of 20,000 rpm.
Still Kicking

Analog readout technology isn’t dead because it’s still highly effective for the majority of low- to medium-level tolerance operations. Few shops have yet to make the switch to digital boring across the board, and it will be a long time before more do so on a regular basis. Digital boring heads cost 60 to 80 percent more than their analog counterparts.

That said, as old boring heads need replacement and more operators become accustomed to the advantages of digital boring adjustments, there eventually will be a turning point in some operations where it makes sense to go all digital. This change won’t happen just because it’s the direction of the industry.
Picture
Kaiser’s Series 310 EWD boring head’s measurement system shows precise linear movement of the tool carrier, permitting diameter adjustments of 0.00005 " (0.001mm).
Digital Advantages
Digital boring heads are, quite simply, easier to work with than analog heads. For tight tolerances, the ability to display actual cutting edge movement means operators don’t have to constantly check for accuracy for fear of backlash. Cartridge screw adjustment as a function of turning a dial screw or ring until a specific mark lines up is very accurate and still viable. But if boring heads aren’t properly maintained, operators can experience backlash.

Backlash is slop between the adjustment input and the tool carrier output. An operator rotating an adjustment ring or turning a dial on a worn or abused analog boring head may not notice any diameter change of the cutting edge on a tool presetter—even after moving several clicks or dial marks.

While the presetter is essential for initial setup, boring often requires a test-cut-and-adjustment procedure, which is most accurately completed while the tool is in the spindle. Heads with backlash make operators wary of adjusting tools in the machine spindle, which costs time and possibly accuracy if the boring bar does not sit in the presetter spindle exactly the same way as it does in the machine tool.

A digital system isn’t concerned with the input mechanism itself; rather, it measures the tool carrier travel directly, so an operator always has access to the true digital diameter readout. It doesn’t measure where the scale ring or dial says the cartridge should be—the real distance is on display.
Don’t Sacrifice PerformanceIf a shop is considering moving from analog to digital boring tools, the best conversions are those that can be accomplished without having to replace any accessories—simple one-for-one boring head trade-offs. Still, ask questions to ensure this is the case with your shop. Users can defeat the purpose of digital ease of use if the head isn’t a 1:1 replacement and additional programming or tinkering is necessary when converting to digital.

For instance, Kaiser’s 112 EWD, 310 EWD and 318 EWD digital boring heads are otherwise identical to their analog predecessors. They have the same boring ranges, cutting parameters and through-coolant capabilities, so an operator can swap an analog for a digital model with little or no reprogramming. All three series use the same accessories, such as boring bars and insert holders, as their nondigital counterparts.
Digital boring gives operators more confidence in their adjustments. It’s faster, too. Trying to make an adjustment of 0.004 " or 0.005 " on diameter when counting little dial divisions on a head, compared to seeing that value on a digital display, is a lot simpler and easier.

The return on investment from digital boring comes not only from time savings when making adjustments on the spindle, but also in the accuracy that prevents poor adjustments and resulting scrap. Shops producing high-end, tight-tolerance parts have expressed the most interest so far in digital boring.
Picture
Digital has become the true common language in metalworking and machining—a fact that will, sooner or later, influence boring tool selection, according to BIG Kaiser.
Despite the obvious advantages of digital, the technology isn’t yet for everyone. But as manufacturing and technology continue to become more and more entrenched in the digital realm, there will be a tipping point after which digital boring is the norm. Some shops will just be ahead of the curve. CTE

About the Author: Matt Tegelman is the Kaiser product manager for BIG Kaiser Precision Tooling Inc., Hoffman Estates, Ill. For more information about the company’s boring tools and other products, call (888) TOOL-PRO or visit www.bigkaiser.com.


Digital boring heads from Big Kaiser were designed to be a simple 1:1 match to their analog predecessors - same boring ranges, cutting parameters, and through-tool coolant capabilities - so an operator can swap an analog for a digital model with little or no reprogramming. Just like your cell phone or computer, it won't be long until you wonder how you ever lived without a digital interface.

Make the leap to digital technology.

WHY DIGITAL?
  • LCD display shows precise linear movement of tool carrier in both directions
  • IP 69K seal rating — highest possible
  • .00005"/ø or .001mm/ø setting accuracy
  • ø.016"-118.15"
  • Through-tool coolant supply
  • Reduces correction time & human error
0 Comments

    Author

    Our NEWS  blog section is written by several different people. Sometimes, it from our team here at Next Generation Tooling & at other times it's by one of the manufacturer's we represent.

    View my profile on LinkedIn

    Archives

    February 2023
    January 2023
    December 2022
    November 2022
    October 2022
    September 2022
    August 2022
    July 2022
    June 2022
    May 2022
    April 2022
    March 2022
    February 2022
    January 2022
    December 2021
    November 2021
    September 2021
    August 2021
    July 2021
    June 2021
    May 2021
    April 2021
    February 2021
    January 2021
    December 2020
    November 2020
    October 2020
    September 2020
    August 2020
    July 2020
    June 2020
    May 2020
    April 2020
    March 2020
    February 2020
    January 2020
    December 2019
    November 2019
    October 2019
    September 2019
    July 2019
    May 2019
    April 2019
    March 2019
    February 2019
    December 2018
    November 2018
    October 2018
    September 2018
    August 2018
    July 2018
    May 2018
    March 2018
    January 2018
    December 2017
    November 2017
    October 2017
    September 2017
    August 2017
    July 2017
    June 2017
    May 2017
    April 2017
    March 2017
    February 2017
    January 2017
    December 2016
    November 2016
    September 2016
    July 2016
    June 2016
    May 2016
    April 2016
    March 2016
    February 2016
    October 2015
    September 2015
    June 2015
    May 2015
    April 2015
    March 2015
    February 2015
    January 2015
    December 2014
    October 2014
    September 2014
    August 2014
    June 2014
    May 2014
    April 2014
    March 2014
    February 2014
    January 2014
    December 2013
    October 2013
    August 2013
    June 2013
    May 2013
    April 2013
    February 2013
    January 2013
    November 2012
    October 2012
    September 2012
    August 2012
    June 2012
    April 2012
    January 2012
    October 2011
    September 2011
    August 2011
    July 2011
    June 2011
    April 2011
    February 2011
    April 2009

    Categories

    All
    2V Industries
    5 Axis
    Aerospace Composites
    Agile Manufacturing
    Allied AccuPort 432
    Allied APX
    Allied EcoCut
    Allied GEN2 T A
    Allied GEN3SYS
    Allied Machine
    Allied Opening Drill
    Allied Original T A
    AMF
    AMT Association For Manufacturing Technology
    BIG Daishowa
    Big Kaiser
    Big Kaiser 318
    Big Kaiser C Cutter Mini
    Big Kaiser C-Cutter Mini
    Big Kaiser EWD EVO
    Big Kaiser Mega Synchro
    Big Kaiser Smart Damper
    Big Kaiser Sporen
    Big Kaiser Unilock
    BIG PLUS
    Blue Photon
    BMT
    Bone Plates
    Boring
    Boring Bars
    Boring Heads
    Boring Large Diameter
    Carmex
    Cbn
    CERAedge Coating
    Chamfering
    Champion Tool Storage
    CNC Milling
    CNC Swiss
    CNC Turning
    Coating AlCrN
    Coating AlTiN
    Coating CERAedge
    Coating PVD
    Coating TiAlN
    Coating TiN
    Coating WXL
    Collets
    Collets DNA
    Collets ER
    Coolant
    Coronovirus
    Countersinks
    Covid 19
    Covid-19
    Deburring
    Digital
    DMG Mori
    Drilling
    Drills Minature
    Drills Spade Type
    Earth Chain
    Efficiency
    End Mills
    End Mills Ceramic
    End Mills Minature
    Engraving Tools
    F20M10
    Fiber Reinforced
    Fifth Axis
    Fixturing
    Gibson Guitar
    Guide Bushings
    Haas Automation
    Hard Milling
    Heimatec
    Heimatec BMT
    Heimatec VDI
    Henninger
    Herringbone Cutter
    Hobbing
    Hommel + Keller
    Hydraulic Chuck
    Hypermill
    IMTS
    IPad
    ITunes
    Jergens
    Kennametal
    Knurling Tools
    Lean Manufacturing
    Machining App
    MA Ford
    MA Ford 178
    MA Ford 278
    MA Ford Diacon
    MA Ford Tuffcut 138
    MA Ford Tuffcut XR7
    Magnetic Deburring
    Marking Tools
    MASA Tool
    Material 13-8
    Material 17 4
    Material 304
    Material Aerospace
    Material Aluminum
    Material Carbon Fiber
    Material CFRP
    Material Cobalt Chrome
    Material Exotic Alloy
    Material Honeycomb
    Material HRSA
    Material Inconel
    Material Laminate
    Material Nomex
    Material Peek
    Material Stainless Steel
    Material Steel
    Material Titanium
    Mega Micro Chuck
    Metalworking Fluid
    Mfg Day
    Microconic
    Microconic 5C
    Microconic F20M10
    Micromachining
    Modern Machine Shop
    Mold
    MPower
    MPower ModLoc
    MPower SpeedLoc
    MPower SpinSelect
    Next Gen Tooling
    NRL National Robotics League
    NTK
    NTK Cut-Off
    NTK SX7
    NTK SX9 SiALON
    NTK TFX
    OK-Vise
    OSG A Brand
    OSG ADF Drill
    OSG Exocarb
    OSG Exopro
    OSG Exotap
    OSG HY Pro Carb
    OSG HY-Pro Carb
    OSG Phoenix
    OSG Tap & Die
    OSG VA-3
    OSG VC-10
    Parlec
    PCD
    PCT
    Platinum Tooling
    PMT
    Presetter
    Promotions
    Quick
    Reamers
    Right Angle Head
    Rineck
    RockLock
    Rotary Toolholders
    Router Downshear
    Router Tooling
    Router Upshear
    Set Up Reduction
    Shrink Fit
    Somta Tools
    Specials
    Speroni
    SPINner
    STEM
    Step Drill
    Suzuki
    Tapping
    Technical Support
    Technicrafts
    Techniks
    Techniks Collets
    Tecnicrafts
    Thread Mill
    Tooling Package
    Tool Presetting
    Unilock
    USMTO
    Vanadium HSS
    Variable Flute
    Workholding
    Workholding Dovetail
    Workholding Milling
    Workholding Turning
    Xebec

    RSS Feed

Picture

About
Contact
TOOLING
WORKHOLDING
EVENTS
NEWS
TECHNICAL


Established 1995
​

Next Generation Tooling
10240 Cavalletti Drive
Sacramento CA 95829
916.765.4227
Northern California
23 Maxwell Street
Suite B
Lodi, CA 95240
Southern California
22343 La Palma Avenue
​Suite 126
Yorba Linda, CA 92887
© 2023 Next Generation Tooling, LLC. 
All Rights Reserved
Created by Rapid Production Marketing

Find us on Instagram @nextgentool

  • Home
    • Schedule
    • Training
  • About
    • History
    • Contact
  • Territories
    • NorCal & N-NV
    • SoCal & S-NV
    • Mountains
  • Principals
    • Tooling >
      • 2V Industries
      • BIG Daishowa
      • Champion Storage
      • Drill America
      • Jewell Group
      • Mapal
      • Martindale Gaylee
      • OSG Tool
      • Performance Micro Tool
      • Platinum Tooling
      • TechniksUSA
    • Workholding >
      • BIG Daishowa
      • Earth Chain
      • Jergens
      • mPower Workholding
  • Promotions
  • Events
  • News
  • Technical