The EcoCut in 17- 4PH Aerospace Stainless Steel cuts cycle time & reduces cost 33%
A Case Study
The end-user is machining bushings made from 17- 4 stainless steel using a Miyano lathe, with 150 PSI through-tool coolant
Previously the customer was using 4 tools to complete the job. A 0.551" (14mm) Chamdrill began the drilling process, followed by a 0.382" (9.7 mm) solid carbide drill. A 3/8" end mill was brought in to perform multiple operations, including a counterbore. The boring bar then finished the hole to size, in a total cycle time of 1 minutes and 2 seconds. Looking for performance improvements, the customer asked if Allied had a multiple operation tool that could help to reduce the cycle times in this application.
Allied Machine & Engineering's Solution
Allied recommended a 0.551" (14mm) EcoCut tool to began the operation, followed by the 0.382" (9.7 mm) solid carbide drill. Then a 0.394" (10mm) EcoCut tool was brought in to complete the form. The boring bar finished the part for exact size and finish tolerance, while providing edge breaks and corner radii. The new total cycle time was 55 seconds. The outcome met the customer’s goals of a reduction of cycle time, which resulted in a lower cost per hole.
The overall cycle time was reduced by 7 seconds for a time savings of 11.5%, thanks to the EcoCut tooling. The cost per hole dropped from $2.11 to $1.40, which delivered a cost savings of 33.5%. This lower cost per h*** was obtained as a result of a dramatic decrease in tooling cost due to the use of a multi-functional tool.
Allied Machine and EcoCut made a difference for the pleased customer.
Our NEWS blog section is written by several different people. Sometimes, it from our team here at Next Generation Tooling & at other times it's by one of the manufacturer's we represent.
Next Generation Tooling
10240 Cavalletti Drive
Sacramento CA 95829
© 2023 Next Generation Tooling, LLC.
All Rights Reserved
Created by Rapid Production Marketing