Sacramento, CA. - Next Generation Tooling, LLC, a manufacturer's representative agency, founded in 1995 and servicing the California Nevada Arizona, Utah, Colorado and New Mexico CNC manufacturing markets has just opened TWO offices in California. Most of Next Generation Tooling's customers know them as "the Next Gen guys" according to Chris Savolainen, the Founder and President of 'Next Gen Tooling'. What was the rationale of opening not one, but two offices when the entire team has worked out of their own home offices for years? "We've grown our market service area quite a bit since we started out servicing just Northern California. We now include most of the Western States of the US. We've s been adding some of the best technical CNC application people we can find to support the unique mix of principles we represent. The products that we represent are what are considered very high performance tooling and workholding. It's some of the premiere products in our entire industry! We determined that we really needed a place to provide on-site technical training. We also needed to carry some inventory to support the unique needs of the aerospace, medical, electronics and defense industries that we support." Said Savolainen. Rob Aldama, Vice-President of Next Gen Tool picks up the story, "At first we thought that one training and showroom might be good enough, but as we started talk to our distributor, machine dealer and end-user manufacturing customers, we discovered that there was a real need for facilities in both Northern and Southern California. None of our competitors are providing the deep technical service that has helped us gain market share, so we really felt we should just take it to the next level and open two facilities." But what about the Pandemic? With the Covid-19 pandemic raging there are not a lot of companies expanding. Most are cutting costs and employees. When asked about this both Chris and Rob stated that their team of people have remained pretty busy throughout this entire period. Chris said "We get asked in to shops to provide technical support pretty often. Putting on the full body PPE suits has been kind of common for us during the past few months." Rob picked it up from there, "I think we may be some of the really select few that have been asked to come into shops because we're not just taking orders, we're reducing cycle time and we're improving efficiency" Chris jumped back in, "And maybe its a little bit self serving, We can have the equipment set-up at both locations instead of trying to bring it into a facility. It's actually a lot easier, faster and safer to bring people to one of our locations rather than try to move things with lots of sweat and heavy breathing in PPE." "Yea, We can bring people to either location and do the training. There are far less interruptions and the I think people learn a lot more, and learn it faster" stated Rob. NGT Warehouse and Training What types of training do they provide at Next Gen's new buildings? They start off with a lot of fundamentals that people running CNC machines may never had any formal training about. That's where their basic Training Classes fit in.
But they also can go much deeper with their Advanced Part Manufacturing training series
3 Comments
As BIG KAISER celebrates 30 years, Chris Kaiser reflects on running a company from home again. It’s been 30 years since I started KAISER Precision Tooling USA, and I never imagined I’d be running this company from home again. Like most BIG KAISER employees, I’m working remote at least a few days each week to maintain the required social distance. I can relate to the experience many are having now as they juggle work and family at literally the same time. Isn’t this the experience of parents everywhere who are also entrepreneurs working to start a new business? Back in 1990, after living and working in the U.S. for nearly a decade, I started this company out of necessity. I knew we needed to change how we were selling the boring tools manufactured by my father’s company in Switzerland, Heinz Kaiser AG. I had a vision to increase sales with better marketing, product deliveries and customer service, but my goals weren’t shared by the agents and partners we had at that time. That’s how I found myself sequestered at home with two little boys regularly knocking on the door asking when I was going to come out and play. As much as I wanted to do that, I also needed to focus on setting up a new company from scratch. There was no building, no equipment, no staff. Many late nights were spent working with a friend in his basement, writing a business plan, setting up systems for accounting and IT, and making the first boring tool catalog. During the day I sought legal advice, met with lenders and looked for a facility that would house this new company. In July of that year, I was joined by my long-time partner, and now BIG KAISER Vice President, Jack Burley. Operations Manager Tim Grosch also started in that first year. There were many other friends and influential people along the way, but these two have been with me on this adventure since the very beginning. On August 1, 1990 – coincidentally also Swiss Independence Day – we opened the doors at our first facility in Elk Grove Village, IL. It was two minutes from my house so I could spend a lot of late nights at work, after dinner with my family, just as my father did when I was little. After 30 years, I’m proud to say we’ve had a good number of customers from the very beginning. Possibly the first was a Swiss-born machinist who carried Heinz Kaiser boring tools back from his vacation in Zurich to his job in the repair center at United Airlines in San Francisco. United remains a customer of BIG KAISER today. Some of those old boring tools are repairable and still in service. Many U.S. companies in defense and other industries bought SIP jig-boring machines made in Geneva, Switzerland. They also invested in precision boring tool kits – packed in a wooden case – from Heinz Kaiser AG. We’re grateful that companies like Bell Helicopter, Sikorsky, Caterpillar, John Deere, Metalex, Vermeer and Viking Pump – among others – are still with us to this day. I look forward to reuniting with long-time customers, partners and friends at a 30th anniversary celebration sometime later this year. In the meantime, I hope we can all get back to the office and a more normal routine very soon. Seeing my grandson on FaceTime and Zoom is just not as good as going outside to play!
Until then, stay well and stay positive. Chris Kaiser Is there any chance someone has a PICCOLO boring tool in the original wooden box from that time? I would love to have a photo of it. BIG KAISER Presents Annual Donation to the National Robotics League from AMT Matching Program.4/14/2020 Customers and partners of BIG KAISER teamed up to generate a $7,283 donation to benefit the National Robotics League (NRL). The amount is nearly 10 percent more than last year and the fourth year-over-year increase in NRL funding from BIG KAISER.
The donation is a 2% match of all qualified orders from NTMA and AMT (Association for Manufacturing Technology) member companies during the final two months of each calendar year. Manufacturers placed orders for cutting tools, tool holders, workholding and tool measurement systems, earning funds for the NRL at the same time. “We need to get involved at every level to grow the next-generation workforce. Our company does that by partnering with local schools, our community colleges and the trade associations,” says Chris Kaiser, CEO of BIG KAISER. “NRL is just one more way for us to engage kids and promote careers in manufacturing.” “We’re not just fighting a skills gap in our workforce, we have an ‘interest gap’ too. The NRL helps create excitement about manufacturing technology and STEM careers,” says Roger Atkins, president at NTMA (National Tooling and Machining Association). “We appreciate BIG KAISER’s continued support year over year, and of course all of the NTMA and AMT members who participate in the program to support the NRL.” The National Robotics League (NRL) is a manufacturing workforce development program of the National Tooling & Machining Association (NTMA) where students design and build remote controlled robots (Bots) to face-off in a gladiator-style competition. Through the manufacturing process of Bot building, students’ imaginations are captured as they design, build and compete with their own robotic creations. Through this hands-on effort along with industry partnerships, students gain practical knowledge of Science, Technology, Engineering, and Math (STEM) – all essential skills for manufacturing. Tim Fugazi joins the Next Generation Tooling team as Regional Manager in Northern California1/2/2020 Please welcome Tim Fugazi to our Next Generation Tooling team. Tim will be working in Northern California as Regional Manager for our principals. Tim graduated from San Joaquin Delta College with a Certificate in Computer-Aided Drafting December in 1999 and finished up his Associate Degree in Machine Tool Technology in May 2010 at the same college.
Tim spent 7 years as a Auto CAD Technician and then added Laser programming to the mix. For the past 18 years Tim has worked as a Machinist, SolidWorks Technician & Lab Technician. His experience with SolidWorks software was to provide mechanical drawings for production, fabrication and/or machining. He operated SolidWorks & HSMWorks software to produce “G” code for vertical mills and lathes as well as working in quality control and dealing with customer warranty issues. Our principals and distributors will be excited to know that Tim has a great understanding of shipping procedures so he has a great understanding of your capabilities and expectations. BIG KAISER is hosting its annual Breakfast & Learn event May 13-16. Each morning, they will have a new technical presentation and serve a complimentary breakfast to get the body and mind ready for the day. After breakfast, you can head next door to attend DMG Mori’s Chicago Innovation Days. Attendees can tour BIG KAISER’s showroom equipped with tool presetters, extensive tooling displays and zero-point workholding solutions. This is a perfect opportunity to talk to engineers, get a presetter demo and discover how BIG KAISER can help when it comes to achieving higher performance on the shop floor. Technical presentations start each day at 8:30 a.m. Monday, May 13 Workpiece Stabilization and Non-Traditional Fixturing for Machining Other Processes Fixturing requirements are becoming more complex as workpiece complexity increases. We will look at how parts that have traditionally posed workholding challenges are being held rigidly and securely with modern-day solutions. Tuesday, May 14 Making the Switch from Negative to Positive Tool Offsets Learn how setting up tools outside the machine optimizes spindle time and reduces the chance of human error. Understand the difference between negative to positive tool offsets, why it’s important, and how it saves time and reduces the burden on operators. Wednesday, May 15 Closing the Loop on Automatic Boring Today’s machine operators are relying more and more on digital equipment to help produce parts. Discover the advantages of automatic boring vs. manual boring processes, breakthrough technologies aiding automatic processes and learn to pick the right applications for closed-loop boring. We’ll also unveil details on BIG KAISER’s EWA program. Thursday, May 16
Anti-Vibration Technology Vibration and chatter due to long reach tooling cause lost productivity and is harmful to the health of machine and spindle. Dampened tooling systems can be the cure. Hoffman Estates, IL – BIG KAISER, a global leader in premium high-precision tooling systems and solutions for the metalworking industries, announces the MEGA Micro Coolant Nut, a solution developed to provide precise coolant supply to micro cutting tool applications at high speeds. Efficient coolant delivery prevents chip jamming, which can cause machine stoppages, service calls, and increase tool wear and poor surface finish. As spindle speeds continue to increase, getting the coolant to the cutting tip has become more challenging.
Exclusively for MEGA Micro Chuck 6S, the MEGA Micro Coolant Nut is an ideal design for high-speed micro machining up to Ø6 mm. By using it instead of a standard nut, tool lifetime is increased by about 35 percent and better cutting performance is achieved for milling applications. The MEGA Micro Coolant Nut is a continuation of BIG KAISER's efforts to drive coolant toward the cutting edge and help to maintain process security. For coolant through drills, BIG KAISER offers the MEGA Micro Perfect Seal Nut. If coolant is required, it should be optimized to maximize its true potential. For more information please contact us! Join us at #IMTS2018! We'll be learning about new products at our principals booth. Check out our schedule, come join us and we'll learn some new things together! Wednesday September 12th
10:30 - 11:30 AM - NTK Cutting Tools Booth W-431664 1:00 to 3:00 PM - Big Kaiser Booth W-431610 Thursday September 13th 10:00 to 11:00 AM - Heimatec Booth W-433427 11:00 to 12:00 PM - 5th Axis Booth W-431158 1:00 to 2:00 PM - Precision Cutting Tools W-432164 Friday September 14th 10:00 to 11:00 AM - Carmex Booth W-431480 11:00 to 12:00 PM - OSG Booth W-432080 1:00 to 2:00 PM - Techniks Booth W-431075 |
NEWSOur NEWS blog section is written by several different people. Sometimes, it from our team here at Next Generation Tooling & at other times it's by one of the manufacturer's we represent. Archives
March 2024
Categories
All
|
About
|
© 2024 Next Generation Tooling, LLC.
All Rights Reserved Created by Rapid Production Marketing
|